请教如图的两个尖点做ASTM F963和EN71-1可以算Potentially hazardous sharp points吗(注解,这两个钩子本来是在里面的,是被我拉出来拍照的,呵呵)??会判FAIL吗??谢谢..
根据16 CFR 1500.48
(4) Inaccessible points. Points shall be considered inaccessible without testing with a probe if they lie adjacent to a surface of the test sample and any gap between the point and the adjacent surface does not exceed 0.020 inch (0.50 millimeter) either before or after the tests of §§1500.51, 1500.52, and 1500.53 (excluding the bite test—paragraph (c) of each section) are performed.
在执行滥用测试前后尖点与邻近的表面的距离不超过0.5mm,认为是不可接触的尖点,那钩子本身是放在里面的,拉出来后测试人员还会再拉一下这个钩子,然后做尖点测试吗???
EN71-1里我没有找到相关条款 ,不知道是不是也是如此测试,请大家指教,谢谢
|
发表于 2011-8-14 23:14:40
收藏
楼主