标准下载论坛

 找回密码
 注册
搜索
热搜: 活动 交友 安全
查看: 1354|回复: 1
打印 上一主题 下一主题

led reliability prediction

[复制链接]
跳转到指定楼层
1#
发表于 2012-5-17 23:37:17 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
MTBF FOR DISCRETE LEDS AND PHOTODIODES

The calculation of Mean Time Between Failure (MTBF) is often required as an aid in predicting the reliability of electronic equipment under different operating conditions.
The value of MTBF for a component is based upon failure-rate models which have been developed in conjunction with MIL-HDBK-217E. The MTBF is not a guarantee of useable product lifetime, but is a guide for planning the operational use of the equipment. The accuracy of the values calculated is dependent upon the validity of the models. Also, the values chosen for the operating parameters must be representative of the operating parameters during actual use

In the case of fiber optic data communication equipment,an area of primary concern is the MTBF values for the discrete Light Emitting Diodes (LEDs) and photodiodes used in the fiber optic transmitters and receivers. The determination of the predicted MTBF for an LED or
photodiode is a calculation using the part failure-rate model for optoelectronic devices as found in section 5.1.3.10 of MIL-HDBK-217E.





Calculating_Mean_Time_Between_Failure_for_Discrete_LEDs_and_Photodiodes.rar (186 KB, 下载次数: 227)
186 KB
2#
发表于 2012-5-17 23:37:23 | 只看该作者
是标准还是教材???
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|标准下载库

GMT+8, 2024-11-29 07:16 , Processed in 0.042096 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表