标准下载论坛

 找回密码
 注册
搜索
热搜: 活动 交友 安全
查看: 1199|回复: 0
打印 上一主题 下一主题

有关推力测试问题

[复制链接]
跳转到指定楼层
1#
发表于 2012-5-18 00:03:30 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
请问下面两种测试有何不同,如何操作
Terminal strength for SMD device: Solder part to PC board using all of the solder procedure. From the opposite of the test board, apply a 1.8Kg force through a hole to the center of the part body, perpendicular to the seating plane for 60 seconds.

Board adhesion (push test): Solder part on a FP4, place the force gauge low, in parallel with the test board, at the center of the components body, and opposite its terminations. slowly push with increasing force till to 4500g or failure occur.

具体是从什么位置,方向加力
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|Archiver|标准下载库

GMT+8, 2024-11-29 07:24 , Processed in 0.072170 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表