塑胶产品抗UV，高低温冲击测试的国际标准，或国家标准

往事随风

不知道到在坐的有没铁铝家具业的同行，如果有的话可以加我QQ一起交流交流， 最主要的是麻烦有塑胶产品可靠性测试标准的朋友告知下，有附件的传附件，没有附件的给个标准号也行，不胜感谢。 有的发我邮箱

孤星伊人

8.17__UV ACCELERATION WEATHERING
8.17.1 Non Operational
a. Test unit(s) turned off
b. No masking material is to be apply to the specimens.
Profile:
1. Obtain material and disperse into 6 specimans
2. One specimen to be kept as virgin for comparison.
3. Mount DUT onto medal mounting rack using galvanized wire.
3. Expose 5 replicate specimens under cycle A criteria per
4. STC 0.68% irradiance for 8 hrs @ 60C, 4hr condensation @ 50C for 500 hr.
4. One specimen shall be removes at or around 100 hrs of exposure for comparison.
All controls and functions should be exercised during this test.
8.17.2 ACEPTANCE CRITERIA
Cosmetic determination at time intervals shall be analyzed to determine rejection criteria.
8.17.3 RELATED DOCUMENTS
ASTM D 4329-99

一个白痴

问度娘，度娘绝对满足你的..

封云亭

楼主。。。是否在找冲击强度的国标？？？
GB 1043是冲击强度的标准自己慢慢看。。。
高低温的 104几自己搜吧。。。塑料件的都在一起呢。。。