我们公司在04年就过了UL认证，在以前的工厂检查中都没有提到这个问题，今年换了一个审核员来就说我们公司的档案里面要求：在绝缘材料里面不可以添加色母，但在当初送样到台湾做实验的时候里面也是有色母的啊，我和美华联系了后他说是我们当时没有把情况和UL工程师说清楚，像这样的情况我们应该怎么办。小弟英文又不是很好，请各位大侠指点迷经啊。
Insulation Material - When the insulation parts are molded or fabricated from regrind materials, blending of material, use of pigment, colorants, flame retardants, or similar means, the parts shall be Recognized Component Fabricated Parts (QMMY2) and meet the following criteria. When a Recognized Component Fabricated Part is involved, the molder’s ID should be on the part, on the parts carton or on a specification sheet with the carton. Also, on the part, shipping carton, specification sheet with the carton or invoice should be a parts ID (original equipment manufacturer’s part designation), molding date and material ID.
Insulating Material Color – All insulating material are any color other than green-and-yellow. |
发表于 2011-10-17 04:40:18
收藏
楼主
