标题: UL1083里的非正常测试 [打印本页] 作者: 9000 时间: 2010-10-31 09:01 标题: UL1083里的非正常测试 UL1083里的非正常测试
对于带外接电源线棒的温控煎锅老说 温控需不需要短路 具体怎么操作的 标准我看了一下不太明白作者: l1116 时间: 2010-10-31 09:01
应该进行UL 1083 46.4的“ABNORMAL OPERATION TEST - SKILLET”测试，方法还是比较简单的，关于电压的选择，样品的放置相信楼主应该都看的明白，简单说下具体的做法：
Part 1 - The unit was operated with 1/2 in. (12.7mm) of fresh unused pure cold pressed peanut oil with the thermostat set to the position that gave maximum heat and with the appliance initially at room temperature. It was operated for a period of 7-1/2 hours, or until ultimate results were observed. The cover was not in place.温控器设置到产生最大温度的位置（根据前面的正常温升测试），锅内添加12.7mm厚的新鲜未使用的压榨花生油，电压是额定电压或额定功率下的电压取大值，从室温开始测试，直到运行7.5小时或最终结果产生。锅盖敞开。
Part 2 - Part 1 was repeated except with the oil drained from the appliance and leaving a residual film of oil behind.
重复上面的测试，但锅内只残留一层油膜就可以（类似于干烧，只是锅上残留一点油膜——把油倾倒后自然留下的油）