UL Wiring Harness橘色标签是帶有Connector的经过加工电子线的UL标签，UL橘色标签需向UL购买，比如：1包500条贴一张UL橘色标签，UL厂家时会回收此标签。作者: geleny 时间: 2011-10-17 05:37
标贴肯定是不能回收的，被发现是会开VN的,其实吃了很多亏，也了解不少了，但始终没有知道该参照什么具体标准做？又谁能告知吗？谢谢！！作者: 蓝色乐章 时间: 2011-10-17 05:37
向他们要几个标准样品，这样不就不犯错误了嘛。作者: 浪人 时间: 2011-10-17 05:37
以下標准可供參考
WIRING HARNESSES RECOGNITION MARKS
电线接插件认可标签
Form 1-N -- This Recognition Mark is used for harnesses consisting of
four parts or less. Each piece of wire, fitting, splice, terminal block, wiring device,
etc. is considered to be a part. Simple terminations of the eyelet, ring, open
spade or quick-connect types are not counted as a part when determining the
form label to be used. One of the four (or less) parts may be a Listed power
supply cord.
形式1-N - 这种认可标签用于包含了四个或少于四个部件的接插件,
每一电线,装配附件,接头,接线盒,连线设备等都看作是一个部件. 简单的
端子比如针眼型,环型, 开口铲型或快接型端子, 在决定标签的形式时,都
不作为一个部件计算在内. 这四个(或少于四个) 的部件之一可能是列名
的电源线.
Form N -- This Recognition Mark is used for harnesses having more
than four parts as described above. The harness may include as one of the parts
a Listed power supply cord.
形式N - 这种认可标签用于包含多于上述的四个部件的接插件.
这种接插件可能包括列名电源线作为其中的一个部件.
Form 1-T -- This Recognition Mark is used for harnesses consisting of
four parts (or less) as described above, using as one of the parts, a power supply
cord which has not been previously Listed and, therefore, must be subjected to
the tests prescribed for a power supply cord.
形式1-T - 这种认可标签用于包含上述四个(或少于四个)部件的接
插件, 使用未经列名的电源线作为其中一个部件, 因此必须首先经过电
源线的测试.
Form T -- This Recognition Mark is used for harnesses having more
than four parts as described above and having as one of the parts a power
supply cord which has not been previously Listed and must, therefore, be
subjected to the tests prescribed for a power supply cord.
形式T - 这种认可标签用于包含多于上述的四个部件的接插件, 并且
使用未经列名的电源线作为其中一个部件, 因此必须首先经过电源线的
测试.作者: geleny 时间: 2011-10-17 05:37
另外电子线及加工过的电子线是否有相关标准?