1 Scope
1.1 These requirements are intended to cover both self-ballasted lamps and self-ballasted lamp adapters
rated 120 to 347 V AC nominal for connection to screw-, pin-base, and recessed single contact (RSC or
R7) lampholders. These devices are intended for use in accordance with the National Electrical Code,
ANSI/NFPA 70, and the Canadian Electrical Code, Part I, in non-hazardous locations, and the
Instalaciones Eléctricas (utilización), NOM-001-SEDE.
1.2 These devices incorporate resistance, reactance, or electronic (solid-state) type ballasts or power
supplies. These devices employ various lamp technologies including, but not limited to, incandescent,
fluorescent, high-intensity discharge lamps, light-emitting diodes.
1.3 This standard does not apply to medium-to-medium base (E26) fittings that incorporate controls such
as photocells, motion detectors, radio controls, or dimmers covered by other standards.
1.4 These devices are not intended for use with emergency exit fixtures or emergency exit lights.作者: 832000 时间: 2010-12-11 13:35
多谢您的回复，
我看了下UL1993是Safety 方面的要求对吧，
请问EMC方面的要求是否也有，是哪个标准呢？作者: 007 时间: 2010-12-11 13:36
能源之星也要当心