标准下载论坛

标题: 如何查找UL导线（AWM）的规格 [打印本页]

作者: 9000 时间: 2010-11-28 15:42
标题: 如何查找UL导线（AWM）的规格
如何查找UL导线（AWM）的规格
从哪里可以查找到UL导线的规格型号区别？

作者: 832000 时间: 2010-11-28 15:42
电源线：
参照UL62-2006

电子线（设备内部使用）：
参照UL758-2006

作者: l1116 时间: 2010-11-28 15:42
UL758中没有导线规格描述，758规格页查询网站上也只是导线粗略描述，我想能更清楚的知道导线的具体规格，如1007,1347,1185等等都是什么样的导线，1347和1185都是屏蔽导线有什么区别等等，不知道在哪里能够查到？

作者: hanson 时间: 2010-11-28 15:42
758规格页上面已经写的很清楚了。
铜线规格，绝缘厚度，耐温温度和耐压参数等等，都已经有具体数字说明了。

不知楼主所问的-------都是什么样的导线----具体的规格----这个到底要问什么？

具体区别在规格页里面都可以做比较了。
按照UL758标准来做的电线，各企业的产品多少还是有些差别的（比如说线径，铜丝规格），但只要条件满足标准规定的内容，就都是可以的。

===================================================================
UNDERWRITERS LABORATORIES INC.                APPLIANCE WIRING MATERIAL
Subj. 758       Section 1       Page 1007       Issued:  1959-05-01
                                 Revised:  2002-12-05

Style 1007       Polyvinyl Chloride Insulated Wire.
______________________________________________________________________________

Rating       80?C, 300 V.
______________________________________________________________________________

Conductor       32-16 AWG, solid or stranded.
______________________________________________________________________________

Insulation       Polyvinyl Chloride, 15 mils minimum average,
         13 mils minimum at any point, 60 or 80?C in oil,
         if applicable.
______________________________________________________________________________

Standard       Appliance Wiring Material UL 758.
______________________________________________________________________________

Instructions Detailed Examination.
to UL          Physical Properties, Unaged.
Representative Spark Test.
______________________________________________________________________________

UL          (4)  Detailed Examination.
Counter-Check (4)  Physical Properties.
Program       (4)  Heat Shock.
         (4)  Cold Bend
*          (4)  Deformation.
*          (12) Horizontal Flame Test.
______________________________________________________________________________

Marking       General.
______________________________________________________________________________

Use          Internal wiring of appliances; or where exposed to oil
         at a tempera?ture not exceeding 60°C or 80°C, whichever
         is applicable.  Tags may indicate the following:
         600 V Peak - For Electronic Use Only.

==================================================================
UNDERWRITERS LABORATORIES INC.                APPLIANCE WIRING MATERIAL
Subj. 758       Section 1       Page 1347       Issued:  1963-10-16
                                 Revised:  2003-03-31

*Style 1347       PVC Insulation with PVC Jacket.
______________________________________________________________________________

Rating       80?C, 300 V.
______________________________________________________________________________

Conductor       No. 26-16 AWG, stranded or solid, tinned or bare copper.
______________________________________________________________________________

Insulation       16 mils minimum average, 13 mils minimum at any point, wall
         of thermoplastic (PVC) rated 80?C.
______________________________________________________________________________

Shielding       Conductive thermoplastic, aluminum-faced "Mylar", copper
         braid or wrap, or equivalent; optional uninsulated drain
         wire.
______________________________________________________________________________

Jacket       Over the shielding, 16 mils minimum average, 13 mils
         minimum at any point, thermoplastic (PVC) shall be applied,
         rated 80?C.
______________________________________________________________________________

Standard       Appliance Wiring Material UL 758.
______________________________________________________________________________

Instructions Detailed Examination.
*to UL       Tensile Strength and Elongation of Insulation and Jacket.
*Representative Spark Test.
______________________________________________________________________________

UL          (4)  Detailed Examination.
Counter-Check (4)  Tensile Strength and Elongation of Insulation
Program          and Jacket.
         (4)  Heat Shock.
         (4)  Cold Bend.
         (4)  Deformation.
*          (12) Horizontal Flame Test.
______________________________________________________________________________

Marking       General.
______________________________________________________________________________

Use          In electronic equipment where exposed to temperatures
         not exceeding 80?C.
==================================================================
UNDERWRITERS LABORATORIES INC.                APPLIANCE WIRING MATERIAL
Subj. 758       Section 1       Page 1185       Issued:  1959-05-01
                                 Revised:  2003-03-31

Style 1185       PVC Insulated, Shielded and Jacketed Wire.
______________________________________________________________________________

Rating       80?C, 300 Volts.
______________________________________________________________________________

Conductor       Copper - 30-4/0 AWG, solid or stranded, tinned or bare.
______________________________________________________________________________

Insulation       Extruded PVC, Class 43

         AWG    Min. Avg., Mils    Min. at any point Mils

         30-16          15             13
         15-10          30             27
         9-8          45             40
         7-2          60             54
         1-4/0    80             72
______________________________________________________________________________

Shield       Optional.
______________________________________________________________________________

Jacket       Extruded PVC, Class 43

         AWG    Min. Avg., Mils Min. at any point Mils

         30-16          15             12
         15-2          30             24
         1-4/0    45             36
         30-16 or lacquered braid
______________________________________________________________________________

Shield       Optional.
______________________________________________________________________________

Jacket       Optional.  PVC, Class 43, 15 mils minimum average,
         12 mils minimum at any point.
______________________________________________________________________________

Standard       Appliance Wiring Material UL 758.
______________________________________________________________________________

Instructions Detailed Examination.
to UL          Physical Properties of Insulation and Jacket.
Representative Spark Test.
______________________________________________________________________________

UL          (4)  Detailed Examination.
Counter-Check (4)  Physical Properties of Insulation and Jacket.
Program       (4)  Heat Shock.
         (4)  Cold Bend.
         (4)  Deformation.
*          (12) Horizontal Flame Test.
______________________________________________________________________________

Marking       General.
______________________________________________________________________________

Use          Internal Wiring of Appliances and Electronic Equipment.

====================================================================

作者: gggffff 时间: 2010-11-28 15:42
有认证的导线，一般在绝缘外套上都有印规格！！

作者: xar7879 时间: 2010-11-28 15:42
导线规格这个不一定啦，一般PVC，硅胶，铁氟龙绝缘电线，一样的号数所用的导体支数，单支导体的直径这些是有区别的。

欢迎光临标准下载论坛 (http://bbs.bzxzk.net/)